The latest designs for this new expanded home consist of a modern spin on a Mediterranean-style county home with spanish tile roof. We achieve this by expanding the existing two-story home to the left of the existing garage and the the entrance of the existing home. Updated second floor layouts allow for outdoor living space over the new garage addition. The new front addition boosts a new curved staircase connecting the main level living space with the bedroom spaces above. A new foyer and dining room is created reusing existing rooms in the house. The interior will elaborate on the theme by integrating curved archways and stone details. The front facade was designed with order in mind – arches and columns provide rhythm and elegance for this new home. The client opted for cast iron railings both inside and outside.
We would love to hear from you about what you think about this project. We sincerely appreciate all your comments – and – if you like this post please share it with friends.
Feel free to contact us if you would like to discuss ideas for your next project!
● Include a requirement in specifications that contractors and subs review HomeFree.
● Ask for and prefer products that have a Health Product Declaration (HPD).
● Avoid products marketed as antimicrobial and claiming or implying a health benefit.
● Prefer non-vinyl flooring products.
● When vinyl is used: Specify phthalate-free; avoid post-consumer recycled content.
● For rubber flooring: Avoid post-consumer recycled content (crumb rubber).
● For carpets: Look for products that don’t use fluorinated stain-repellent treatments; specify backings that are vinyl-free and polyurethane-free and do not contain fly ash.
● For ceramic tiles, prefer those made in the USA where most manufacturers have eliminated toxic lead compounds from ceramic tile glazes. Avoid post-consumer recycled content from CRTs (cathode ray tubes) which contain high concentrations of lead.
● Prefer paints that meet the Green Seal-11 (GS-11) standard from 2010 or later whenever possible or specify paints known to be free of alkylphenol ethoxylates (APEs).
● Specify bases with 10 g/L of VOCs or less and colorants that do not increase the overall VOC content.
● At a minimum, specify paint bases and colorants with a VOC content of 50g/L or less.
● Look for paints that have VOC emission testing and meet the requirements of the CDPH (California Department of Public Health) Standard Method for Testing VOC Emissions (01350).
● Specify boards made with natural gypsum.
● If possible, avoid pre-consumer recycled content (also known as synthetic gypsum or FGD) to avoid the release of mercury in manufacture.
● Specify residential fiber glass batt insulation — it has been reformulated to be free of formaldehyde — or formaldehyde-free mineral wool batts. Unfaced batts are most preferable.
● For blown insulation, prefer cellulose or un-bonded fiber glass.
● Consider alternatives to rigid board insulation whenever possible. If board insulation is required, specify mineral wool boards and look for those that meet the requirements of CDPH Standard Method for Testing VOC Emissions (01350) for residential scenarios. If plastic foam insulation is used, look for those that are halogen-free. Consider upgrading to expanded cork insulation.
● Avoid spray polyurethane foam (SPF) insulation whenever possible.
● For sealing applications, prefer caulking or sealant tapes to spray foams.
● Think of countertops as a system of products: the surface itself, an adhesive, and potentially a surface treatment, which may need to be re-applied regularly. Each of these elements have different health concerns.
● Sealant products can introduce hazardous chemicals. Specify countertops that do not need to be sealed after installation, such as engineered stone, cultured marble, or solid surfacing.
● Plastic laminate is not a top countertop choice, but if used, specify that the substrate be made with NAF (No Added Formaldehyde) or ULEF (Ultra Low Emitting Formaldehyde) resins. © Healthy Building Network [June 2018]
CABINETRY & MILLWORK + DOORS
● Prefer solid wood products over composite.
● When using composite wood, specify materials that are NAF (No Added Formaldehyde) or ULEF (Ultra Low Emitting Formaldehyde) whenever possible.
● Prefer products that are factory-finished.
● For edge-banding, specify products with veneer rather than vinyl.
We would love to hear from you on what you think about this post. We sincerely appreciate all your comments – and – if you like this post please share it with friends. And feel free to contact us if you would like to discuss ideas for your next project!
The following is an update to a project that we posted a while back:
@FC3ARCHITECTURE – Project Under Construction (North Arlington, NJ)
We would love to hear from you on what you think about this post. We sincerely appreciate all your comments.
If you like this post please share it with friends. And feel free to contact us if you would like to discuss ideas for your next project!
Frank Cunha III, AIA
Licensed in CT, DC, DE, FL, MD, NJ, NY, PA, VA
I Love My Architect – Facebook
FC3 ARCHITECTURE+DESIGN, LLC
The blog, “Not PC”, posted an interesting article on writer Robert Heinlein’s house that he designed based on the ideas of efficiency experts, Frank & Lillian Gilbreth. Heinlein noted that Frank Lloyd Wright and Richard Neutra, while geniuses, could learn something from the Gilbreths. Click here to read the rest of the story.
If you like this post please share it.
Frank Cunha III
I Love My Architect – Facebook
Copyright © 2010 Frank Cunha III.
Frank Cunha III – Architect & Visual Artist
Registered Architect, NJ, NY, PA, CT, DE
PO Box 335, Hamburg, NJ 07419
E-mail: fc3arch @me.com
Fax: 973.718.4641Web | FC3 Architecture | FC3 Photography | Blog | Facebook | Twitter | LinkedIn | Zenfolio