Top 20: Technology & Innovation Ideas For Architects

Thank you for all the support and encouragement over the years.  Here are some of our favorite blog posts about technology and innovation related to the field of Architecture:

  1. High Performance Building Design
  2. 3-D Printing
  3. Connected Spaces
  4. Benefits of Using Digital Twins for Construction
  5. Digital Twins
  6. Drone Technology
  7. Artificial Intelligence
  8. Immersive Experience in Architecture
  9. Smart Cities
  10. Big Data in Architecture
  11. Creating High Performance Buildings through Integrative Design Process
  12. Forget Blueprints, Now You Can Print the Building
  13. The 7 Dimensions of Building Information Modeling
  14. Parametric Architecture and Generative Design System
  15. Architecture Robots
  16. Internet of Spaces
  17. Sustainable Design Elements to Consider While Designing a Project
  18. What is a High Performance School?
  19. What is BIM? Should Your Firm Upgrade? by @FrankCunhaIII
  20. Renewable Wave Power Energy

We would love to hear from you on what you think about this post. We sincerely appreciate all your comments – and – if you like this post please share it with friends. And feel free to contact us if you would like to discuss ideas for your next project!

Sincerely,
FRANK CUNHA III
I Love My Architect – Facebook


Drone Technology

Drone-Technology-02Drones—also called unmanned aerial vehicles (UAVs) or unmanned aerial systems (UAS)—are most simply described as flying devices that do not carry a human pilot. They can be remotely piloted or they can pilot themselves based on pre-programmed instructions. They can be equipped with GPS, on board computers, hardware, electronics, sensors, stabilizers, auto-pilots, servo controllers, and any other equipment the user desires to install. Drones can resemble fixed-wing airplanes but more commonly take the form of quad-copters, that is, rotor-wing aircraft that can take off and land vertically. Most people know that drones can be equipped with infra-red cameras (still and video), license-plate readers, “ladar” (laser radar that generate three-dimensional images and can be seen through trees and foliage), thermal-imaging devices, or even sensors that gather data about weather, temperature, radiation or other environmental conditions. All of this can be used to generate images, recordings or data that design professionals eventually will want to use in their business.

Drones could be a valuable tool in construction, widening the spectrum of what’s possible in architecture, according to architect Ammar Mirjan.

“We can fly [drones] through and around existing objects, which a person couldn’t do or a crane couldn’t do,” explains Mirjan. They can be programmed to weave simple tensile structures in the air, for example.

Sources & References:

https://www.dezeen.com/2017/05/04/mark-dytham-interview-drones-uavs-bring-profound-change-architecture-cities/

http://www.theaiatrust.com/architects-guide-using-drones/

https://www.dezeen.com/2018/05/25/10-ways-drones-will-change-the-world/

How are aerial mapping drones helping architects?

Architects are exploring the many benefits of mapping drones for improving and expanding their businesses. Here are just a few examples:

The most popular application for small drones is aerial photography and video capture to track and share “before and after” progress over time.

Ability to securely collaborate on specific areas of interest with your team, contractors, and customers.

Tell the story of your project.  Show current and potential customers before and after fly-throughs of your job site so they can experience and appreciate the scale and impact of your work.

3-D point clouds with centimeter grade accuracy on progress, so you can get the precision updates you need to keep project approvals on time, without physically traveling to the site.

Get context for your project, plan your architecture with a full view of the surrounding area.

See 3D volumetrics so you know what you’re building on and can track progress.

Uses for Drones

  • Project documentation
  • Presentation + marketing
  • Architectural cinematography
  • Site analysis
  • Topographic mapping
  • Construction observation
  • Educational tool
  • Lead generation (working with Realtors)

Conclusion

According to an interview in Dezeen.com with Mark Dytham, architect and co-founder of Tokyo-based Klein Dytham Architecture, “Drones will transform the way buildings are designed, the way they look and the way they are used.

One way in which drones are proving to be a useful tool in architecture is through surveying. Due to their small size and relative ease of maneuverability, drones make an easy task of accessing difficult to reach places.

According to ArchDaily.com, “While using satellite imagery for site planning is common among architects, these visuals are often available in low resolution and produce less accurate data. Data collected by drones can completely eliminate the need for hiring land surveyors for creating topographic surveys. Instead, architects can use this information to build accurate 3D models of the terrain and site and import them directly into drafting and modeling software like Rhino.” In the past, architects would have relied on planes, helicopters, or satellite imaging for aerial footage.

Sources & References:

https://www.identifiedtech.com/blog/construction-drones/how-aerial-mapping-drones-can-help-architects/

http://residencestyle.com/the-use-of-drones-in-architecture-soars-to-new-heights/

We would love to hear from you on what you think about this post. We sincerely appreciate all your comments – and – if you like this post please share it with friends. And feel free to contact us if you would like to discuss ideas for your next project!

Sincerely,
FRANK CUNHA III
I Love My Architect – Facebook


Using 3-D Technology to Evaluate Existing Conditions & Brainstorm Conceptual Design Options

Quick Conceptual Hand Sketch by Frank Cunha III

IMG-3546

Google Photograph of Existing Conditions

7-3-18 original

3-D Model of Existing Conditions by Michael Chiappa

7-3-18

Exploded 3-D Model of Existing Conditions by Michael Chiappa

7-4-18.jpgFollow Michael Chiappa on Instagram and LinkedIn.

Software: Rhino 6; Photoshop

We would love to hear from you on what you think about this post. We sincerely appreciate all your comments – and – if you like this post please share it with friends. And feel free to contact us if you would like to discuss ideas for your next project!

Sincerely,
FRANK CUNHA III
I Love My Architect – Facebook


Design Development

Unfortunately, the Delaware Welcome Center was a project I was not able to see through construction.  I was grateful at the opportunity to work with my previous firm (Cubellis Ecoplan) on the programming, schematic design and design development, while I was with them.  Because the boss was away for the summer we were able to pull off some pretty amazing things with this project utilizing interns from across the firm in various states.  We used a 3-D environment to conceptualize the project and utilized web-ex to sell the concept to the client throughout the design process.  It was fun being the project manager on a project that brought people together from all over the east coast, both from the design team as well as the client team.

We would love to hear from you on what you think about this post. We sincerely appreciate all your comments.

If you like this post please share it with friends. And feel free to contact us if you would like to discuss ideas for your next project!

Sincerely,
Frank Cunha III, AIA
Registered Architect
Licensed in CT, DC, DE, FL, MD, NJ, NY, PA, VA
I Love My Architect – Facebook
FC3 ARCHITECTURE+DESIGN, LLC
e-mail: fcunha@fc3arch.com
mobile: 201.681.3551
web: http://fc3arch.com


On the Boards (East Orange, NJ) Designed by @FC3ARCHITECT

Another Update (6/30/2014):
1406 AKROSS EXTERIOR RENDERING 06-30-2014 FINAL WITH LOGOS

We are currently working on the design of new front facade and vanilla box spaces for 4 new retail tenants.

From Quick Sketch to 3-D Model Using Revit:

Latest Rendering - March 10, 2013

Latest 3-D Rendering – March 10, 2013

1303-5RETAIL-01-24-13-FACADE_DESIGN

Latest 3-D Rendering – January 25th

Initial 3-D Rendering - January 18th

Initial 3-D Rendering – January 18th

1302 - Retail Facade - Frank Sketch 2013-01-03_Final

Initial Sketch (on trace paper) – January 11th

Existing Photograph

Existing Photograph

Also Check Out:

We would love to hear from you on what you think about this post. We sincerely appreciate all your comments.

If you like this post please share it with friends. And feel free to contact us if you would like to discuss ideas for your next project!

Sincerely,
Frank Cunha III
I Love My Architect – Facebook

FC3 ARCHITECTURE+DESIGN, LLC
P.O. Box 335, Hamburg, NJ 07419
e-mail: fcunha@fc3arch.com
mobile: 201.681.3551
direct: 973.970.3551
fax: 973.718.4641
web: http://fc3arch.com
Licensed in CT, DC, DE, FL, MD, NJ, NY, PA, VA